MS SERIES
Dynetic Systems standard product DC Brushed servo motor line

MS15

Power Options
Winding Options
Rear Options
Output Options
Ratio Options
09 = 30 WATTS 12 = 12 Volts 0 = None 0 = None See Figure 1
17 = 40 WATTS 24 = 24 Volts 1 = Rear shaft 1 = NEMA 17 Flange
25 = 50 WATTS 36 = 36 Volts 2 = Encoder, 500 Line, square wave two channel quadrature with index. 8 pin connector 2 = Gearhead, Planetary, GT
  48 = 48 Volts 3 = Encoder, 1000 Line, square wave two channel quadrature with index, 8 pin connector 3 = Gearhead, Planetary, GCP
4 = Encoder, 500 Line, dual quadrature output with index, complements and line driver, 24" cable 4 = Gearhead, Planetary, GC
5 = Encoder, 1000 Line, dual quadrature output with index, complements and line driver, 24" cable  
6 = Failsafe Brake, 1 in-lb, Power Off



MS22

Power Options
Winding Options
Rear Options
Output Options
Ratio Options
10 = 60 WATTS 24 = 24 Volts 0 = None 0 = None See Figure 1
15 = 92 WATTS 36 = 36 Volts 1 = Rear shaft 1 = NEMA 23 Flange
20 = 109 WATTS 48 = 48 Volts 2 = Encoder, 500 Line, square wave two channel quadrature with index. 8 pin connector 2 = Gearhead, Planetary, GCP
25 = 116 WATTS 60 = 60 Volts 3 = Encoder, 1000 Line, square wave two channel quadrature with index, 8 pin connector 3 = Gearhead, Planetary, GC
30 = 145 WATTS 72 = 72 Volts 4 = Encoder, 500 Line, dual quadrature output with index, complements and line driver, 24" cable  
90 = 90 Volts 5 = Encoder, 1000 Line, dual quadrature output with index, complements and line driver, 24" cable
6= Failsafe Brake, 3 in-lb, Power Off



MS31

Power Options
Winding Options
Rear Options
Output Options
Ratio Options
12 = 222 WATTS 24 = 24 Volts 0 = None 0 = None See Figure 1
18 = 320 WATTS 36 = 36 Volts 1 = Rear shaft 1 = NEMA 34 Flange
30 = 426 WATTS 48 = 48 Volts 2 = Encoder, 500 Line, square wave two channel quadrature with index. 8 pin connector 2 = Gearhead, Planetary, GCP
  60 = 60 Volts 3 = Encoder, 1000 Line, square wave two channel quadrature with index, 8 pin connector 3 = Gearhead, Planetary, GC
72 = 72 Volts 4 = Encoder, 500 Line, dual quadrature output with index, complements and line driver, 24" cable
90 = 90 Volts 5 = Encoder, 1000 Line, dual quadrature output with index, complements and line driver, 24" cable
110 = 110 Volts 6 = Failsafe Brake, 15 in-lb, Power Off
 

Manufacturer and Distributor of Highly Engineered Motors and Motion Control Products
Dynetic Systems / 763-441-4300
19128 Industrial Blvd. Elk River, MN 55330 USA

home / dc brushed motors / dc brushless motors / actuators / gearheads / site map