Medical Motors from Dynetic Systems

MEDICAL MOTORS

Land, Sea, or Air, whatever your needs are in motion control, Dynetic Systems is prepared to deliver either a standard or custom designed motor or actuator solution.

Our Engineering staff is available to assist you in properly selecting and sizing a motor. Prototyping is available for OEM applications. Design possibilities include: low and high temp, wet motors, high altitude, custom shafts, cables, connectors and much more, or other special requirements.

Designed and built in the USA, Dynetic Systems works with you to deliver the custom motor or sub-assembly you require for a complete turn key solution.

Description	Specifications	Drawing	3D Models
BLOOD CENTRIFUGE MOTOR Custom designed hollow shaft brush motor directly drives centrifuge bowl. Precision ground stainless steel shaft, internal EMI Filter. Polished shaft extension for vacuum seal.	Proprietary
PATIENT BED GEARMOTOR Custom Right Angle Gear motor for patient bed adjustment. Smooth, quiet, powerful worm gearing Encoder ready DC brushed motor extended output shaft with hand crank feature.	Proprietary
BED LIFT ACTUATOR Custom Right Angle Gear motor for patient bed adjustment. Smooth, quiet, powerful worm gearing Encoder ready DC brushed motor extended output shaft with hand crank feature.	24 Volt DC 1.6 Amps 59 in-lbs Cont. Torque 70 in-lbs Peak Torque 80 RPM 15:1 Ratio
BRUSHLESS MEDICAL MOTOR 3 Phase Brushless Motor with Integral Planetary Gearing. O-Ring Sealed.	28 Volt DC 3.5 Amps 0.08 Nm/A Torque Constant 0.28 Nm Rated Torque 3000 RPM 15.65:1 Ratio
CUSTOM BRUSHLESS GEARMOTOR WITH ENCODER Stainless Steel gearhead with ABEC 3 or better ball bearings. 4 pole 3 phase brushless motor.	28 Volt DC 0.16 Amps 9.4 oz-in/Amps Cont. Torque 1.5 oz-in Rated Torque 3400 RPM 49:1 Ratio
PRECISION GEARMOTOR Compact, Precision Gear motor powers emergency rescue equipment. High torque planetary gearing combined with a custom high peak torque DC brushed motor.	24 Volt DC 2.8 Amps 21 ft-lbs Cont. Torque 40 ft-lbs Peak Torque 19 RPM 256:1 Ratio
AXIS DRIVE MOTOR Custom designed hollow shaft gear motor. Encoder ready high torque DC brushed motor and strong, quiet, worm drive reduction with hardened, ground gears. Powers scanning equipment for medical diagnostic machine.	48 Volt DC 4.4 Amps 66 in-lbs Cont. Torque 1000 in-lbs Peak Torque 26 RPM 10 lbs Unit Weight
MOTORIZED BACKBOARD ASSY Compact, Precision Gear motor powers emergency rescue equipment. High torque planetary gearing combined with a custom high peak torque DC brushed motor.	24 Volt DC 2.8 Amps 21 ft-lbs Cont. Torque 40 ft-lbs Peak Torque 19 RPM 256:1 Ratio