Robotic Motors from Dynetic Systems

ROBOTIC MOTORS

Land, Sea, or Air, whatever your needs are in motion control, Dynetic Systems is prepared to deliver either a standard or custom designed motor or actuator solution.

Our Engineering staff is available to assist you in properly selecting and sizing a motor. Prototyping is available for OEM applications. Design possibilities include: low and high temp, wet motors, high altitude, custom shafts, cables, connectors and much more, or other special requirements.

Designed and built in the USA, Dynetic Systems works with you to deliver the custom motor or sub-assembly you require for a complete turn key solution.

Description	Specifications	Drawing	3D Models
DUAL DRIVE ASSEMBLY Dual Gearhead Drive Motor. IP54 Sealed Planetary Gear motor for driving the wheels of a video inspection robot. Unit becomes an integral part of the robot chassis.	24 Volt DC 6.1 Amps 104 in-lbs Cont. Torque 295 in-lbs Peak Torque 100 RPM 49:1 Ratio 9 lbs unit weight
THRUSTER MOTOR Propulsion Thruster Motor for unmanned underwater robot. Up to six units used per machine. Brushed high torque Rare Earth magnet planetary gear motor with custom output shaft. Half the size and weight of previously used motor with more thrust.	120 Volt DC 2 Amps 12 in-lbs Cont. Torque 70 in-lbs Peak Torque 4.2:1 Ratio 1500 RPM 2400 RPM max. .3 Horsepower cont. 1.2 Horsepower Peak 2.5 lbs Unit Weight
DRIVE MOTOR ASSY	30 Volt DC 4.9 Amps 7.3 oz-in Cont. Torque 40 oz-in Rated Torque 4900 RPM
GEARMOTOR	12 Volt DC 3.25 Amps 1.89 oz-in Cont. Torque 6 oz-in Rated Torque 6700 RPM
MOTOR / TACHOMETER	48 Volt DC 3.1 Amps 11 oz-in Cont. Torque 40 oz-in Rated Torque 4900 RPM
MOTOR / ENCODER	24 Volt DC 4.9 Amps 7.3 oz-in Cont. Torque 40 oz-in Rated Torque 3850 RPM
ROBOTIC DRIVE ASSEMBLY Custom Designed Drive Gear Motor Assembly for leading manufacturer of military robots. Mounts directly in chassis frame. Incorporates wheel & sprocket hub. Brushed DC motor, holding brake, 3 stage planetary gear reduction, cable harness. High temperature modifications.	30 Volt DC 5 Amps Torque - Classified Speed - Classified
BRUSHLESS DRIVE ASSEMBLY Custom Brushless Gear Motor, planetary gearing, encoder, and holding brake designed for leading manufacturer of military robots. Drop in upgrade unit to increase power and speed of robot without chassis modifications. More than doubled the robots power. Designed, prototyped, and delivered within six weeks to meet U.S. Military requirement.	35 Volt DC 12 Amps Torque - Classified Speed - Classified 6.9 lbs Unit Weight
GEARMOTOR Sealed Design. RA Worm Gearhead Sealed connector and powercord.	15 Volt DC 9.7 Amps 3.7 in-lbs Cont. Torque 4900 RPM 60:1 Ratio